Static pressure ventilation: the new air ventilator selects reliable electronic components and matches different control modes according to different usage environment. It can realize automatic timing, preset, noise reduction system, air foam padding material inside the main body shell, metal sheet connected with sealing material, reducing noise of machine, and shell, shell, fresh air with frame. Different materials of cold plate plastic and stainless steel plate are used to filter and purify the air, to ensure the quality of indoor air, and to ensure that the indoor cooling and heating load (temperature) is basically not affected by the air.

　　風機出風口可上下調節風向:回風口可與出風口濾網配合使用，可調節接頭角度，葉片之間有ABS塑料固定支架。風管安裝前應先除塵，確保內外風管外觀整潔。安裝前應檢查風管的平整度和水平度。清洗時可將安裝在濟南通風排煙管道上的固定過濾網從滑塊上取下，清洗后再從滑塊上推入繼續使用。自掛百葉式風口有正壓空調室自動排風。通常情況下,根據風口百葉窗式的自重和自然下垂,隔離室內和室外空氣交換,當室內空氣壓力大于室外空氣的壓力,空氣就會被風吹百葉窗式排氣,相反,當室內空氣壓力小于室外空氣的壓力,空氣不能回流進房間,風口有單向的檢查功能。

　　The air outlet of the fan can adjust the wind direction up and down: the return air outlet can be used together with the filter screen of the air outlet, the angle of the joint can be adjusted, and there is ABS plastic fixed support between the blades. Dust shall be removed before the installation of air duct to ensure the appearance of internal and external air ducts is clean. Check the flatness and levelness of air duct before installation. During cleaning, the fixed filter screen installed on the ventilation and smoke exhaust pipe of Jinan can be removed from the sliding block, and then pushed into the sliding block for further use after cleaning. The self hanging shutter type air outlet has positive pressure air conditioning room automatic exhaust. Generally, according to the self weight and natural droop of the louver type of the air outlet, the indoor and outdoor air exchanges are isolated. When the indoor air pressure is greater than the outdoor air pressure, the air will be blown by the wind to exhaust the louver type. On the contrary, when the indoor air pressure is less than the outdoor air pressure, the air cannot return to the room, and the air outlet has a one-way inspection function.

　　排煙管道的作用是將室內的煙氣通過通風設備排到室外。由于煙氣往往附著在管道上，所以需要經常清洗煙氣排氣管。煙管廣泛應用于賓館、工廠等場所。

　　The function of the smoke exhaust pipe is to discharge the indoor smoke to the outdoor through the ventilation equipment. As the flue gas is often attached to the pipeline, it is necessary to clean the flue gas exhaust pipe frequently. Smoke pipe is widely used in hotels, factories and other places.

　　濟南飯店通風排氣管是為了使空氣流通，降低有害氣體的濃度而設計的一種通風管道。材料分:一般來說,有:鋼導管(普通鋼)、鍍鋅鐵皮(錫)管,不銹鋼通風管、玻璃鋼通風管道、塑料通風管、復合通風管,彩鋼夾心保溫板通風管,雙面鋁箔保溫通風管,彩鋼保溫風管、粘合層(等)使用的通風管,礦井通風管塑料通風管,等等。

　　Jinan Hotel ventilation exhaust pipe is designed to make the air circulate and reduce the concentration of harmful gases. Materials: Generally speaking, there are: steel conduit (ordinary steel), galvanized iron sheet (TIN) pipe, stainless steel ventilation pipe, FRP ventilation pipe, plastic ventilation pipe, composite ventilation pipe, color steel sandwich insulation board ventilation pipe, double-sided aluminum foil insulation ventilation pipe, color steel insulation air pipe, adhesive layer (etc.) used ventilation pipe, mine ventilation pipe plastic ventilation pipe, etc.

　　排煙管道與排煙通風管道明顯不一樣，雖然它們多為鍍鋅鐵皮制成，但排煙管道要求耐高溫，對防火有較高的要求;建筑設計中，排煙管鍍鋅鐵皮厚度按高壓標準選擇，一般通風系統按中低壓系統選擇。

　　The smoke exhaust pipes are obviously different from the smoke exhaust and ventilation pipes. Although they are mostly made of galvanized iron sheet, the smoke exhaust pipes are required to be heat-resistant and have high requirements for fire protection. In the architectural design, the thickness of galvanized iron sheet of smoke exhaust pipes is selected according to the high pressure standard, and the general ventilation system is selected according to the medium and low pressure system.

　　以上是濟南排煙罩公司小編為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://zypolishing.comThe above is the relevant content introduced by Jinan smoke hood company. To learn more, please visit the website: http://zypolishing.com